01. ViDiTech VDT2500CV (2x absolute vibrations)

Viditech VDT-2500CV is a nine-channels digital measuring instrument for two ICP accelerometers, which measures and evaluates vibration velocity in ISO band (2 channels), bearing condition in band up to 15kHz (2 channels), Pt100 temperatures (4 channels) and revolutions (1 channel) of the rotating machines.

The price for OEM customers and for more than 10 pcs is:

           954 EUR

More details

1 590,00 EUR  tax excl.
1 923,90 EUR  tax incl.

Product From (qty) Discount
01. ViDiTech VDT2500CV (2x absolute vibrations) 10 -40%

The instrument is fully autonomous, it means with no need of superior system (PC). All operations (FFT analysis, recorder etc.) are done and stored inside the instrument.

 Up to nine channels universal measuring units (2500 series) are useful as a very reliable protective units turning the machine OFF if any monitored value exceeds set limit) as well as a diagnostic instrument (thanks to the  frequency analysis with high resolution, SD card recorder, trends, postmortem history etc.).

The unit can be set to several types by internal firmware thanks to the universal common hardware platform and can fulfill customer based solution also (3000 series).The units have universal input circuits allowing all common used sensor connection (ICP accelerometers, electrodynamic sensors, proximity sensors).

Measuring of the temperature is done via four three-wires Pt100 sensors inputs. Complete setup and control of the unit can be done in the fields (through display and keypad) or remote through PC software over Internet).

Change of the firmware can be done remote (at the customer) via ModBus.

ISO velocity range frequency response (1 ... 1000) Hz:

Acceleration frequency response (100 ... 15000) Hz:

  • Supply voltage: 18-36VDC
  • Power consumption: 8 W ± 0,25W
  • Operational temperature: 0 to + 65°C
  • Relays output load: 8A/250VAC
  • Protection class: IP20
  • Dimensions: 95mm x 137mm x 108mm (W x H x D)
  • Weight: 700g
  • Accuracy: ± 0,5% MR at 80Hz, ±3% MR in the measuring band
  • Temperature: Pt100 three-wire sensor: ± 2°C in range 0°C to 150°C
  • FFT window types: Rectangular / Hann
  • FFT averages: 2/4/8/16
  • Instrument type: for absolute vibration measuring using accelerometers
  • ISO band measuring: (1/3/10 ... 1.000) Hz
  • Bearing condition measuring: up to 15 kHz
  • Communication: ModBus RTU/ModBus TCP/IP
  • Analog outputs (4...20)mA: 6x (vibration velocity (2), temperature (2), universal (2)
  • Other: recorder (SD card), trends of all values, postmortem record, option - dynamic balancing, run-up/coast down